We are engaged in manufacturing Hydraulic Cylinders, Jacks, which ranges from bore 25 mm x rod 12 mm x stroke 10 mm to bore 900 mm x rod 600 X stroke 5000 mm. The hydraulic cylinder is also available in tie rod, welded, custom – built threaded and block forms to meet the requirement of international quality standard. These are composed of hone tubes that are micro finished to a Ra value less than 0.3 microns. The hydraulic cylinder offered by us is also available with imported sealing and guidance systems.

We offer Hydraulic Cylinders under the brand name of ‘Precise’. Available with range from bore 25 mm x rod 12 mm x stroke 10 mm to bore 900 mm x rod 600 X stroke 5000 mm, these are widely used in various industries. To ensure international quality standard hydraulic cylinder, we make use of imported sealing and guidance systems. The hydraulic cylinders are also available with imported honed tubes. All the honed tubes are micro finishes to a Ra value less than 0.3 microns. Our range comes with Piston rods that are ground and hard chrome plated.

Features:

• Honed tube: All the tubes are micro honed for superior surface finish with Ra value less than 0.3 microns
• Piston rod: En–8 to En–353 are ground and hard chrome plated with 25 microns minimum plating thickness
• Piston: Single piece design to accommodate low friction seals
• End covers: Accurately machined cast iron, mild steel plates
• Sealing systems: Low friction seals with operating Pressures up to 80 mpa from BUSAK and SHAMBAN
• Guidance systems: Turcite / Phosphor bronze bushings to ensure positive guidance

We provide Pneumatic Cylinders that are designed in compliance with international quality standards. These are available in different specifications to suit the requirement of Construction, Mining, Pharmaceutical, Aviation, Steel Rolling, Railways and Extrusion Industries. The hydraulic cylinder offered by us produces force by converting the potential energy of compressed gas into kinetic energy. Our pneumatic cylinders are mounted with rear pivot, front pivot, front flange, rear flange, foot MTG, neck MTG and center trunnion.

Features:

• Corrosion resistant
• Less maintenance
• Precision functioning
• Easy to install
• Long service life

11/2" Bore X 400 mm Stroke Rear Pivot with Fork is represented as (15 RP 400 F)

• Media : Air
• Mountings & sAccessories
• Seals : Nitrile, Viton on request.
• Temperature : Oc to 80c (For Nitrile Seals)
• Piston : Upto 4" aluminium & from 5" to 14" cast iron.
• Pressure : 0.5 to 10.2 kgf/cm, high pressureon request.
• Piston Road : En-8 (Ground & Hard Chrome Plalted) SS 304 on request
• End Covers : Up to 4" Aluminium Die Casted & powder coated.From 5" to 16" close grain cast iron & powder coated.
• Cylinder Barrel : upto 4" Dia. Brass, Aluminium, MS (Honed & Hard Chrome Plated) From 5" dia. To MS (Honed & Hard Chrome Plated) Powder Coated on request.

We are engaged in offering Laboratory Presses, which are fabricated using quality tested components. These presses are equipped with PLC with display unit and PID type temperature controllers. Ideal for molding rubber & plastic sheets or samples for laboratory tests, these presses are widely used in Construction, Mining, Pharmaceutical, Aviation, Steel Rolling, Railways and Extrusion Industries.

We provide Laboratory Presses that are suitable for molding small series of rubber & plastic parts. Designed in compliance with international quality standard, these automatic presses control device is used for programming an automatic production cycle by inserting up to 5 degassing cycles and curing time for molding. The press is automatically opens and a beeper signals the end of the cycle during the end of the programmed time. These presses are widely appreciated for features like low maintenance, low noise and need minimum floor space.

Features:

• A specially designed heating system ensures a high uniformity of temperature of the plates. For this reason, the press is ideal for molding rubber & plastic sheets or samples for laboratory tests. Digital PID Controllers - FUJI (Japan make) are provided for accurate temperature measurements.
• Press structure varies and can work in 3 shifts.
• The Press is covered from all three sides except front side for loading and unloading of mould inside the press. At the front side, a safety photo guard is fixed for operator's safety.
• 4-Pillard type construction ensures better alignment.
• PLC with display unit assures easy operation of the press.
• Automatic press control device for programming an automatic production cycle by inserting up to 5 degassing cycles and curing time for molding. At the end of the programmed time, the press automatically opens and a beeper signals the end of the cycle.

Specification:
Standard Items:

• Electric motor
• Photo safety guard (Sick Germany)
• Front light for operator's convenience
• PLC with display (4 lines)
• Pressure setting through PLC
• Emergency push button
• Two hand push button operation
• Tower light
• PID type temperature controllers
• Mould bank records in PLC
• LVDT (Potentiometer) controlled ram movement

We have emerged as a renowned name by offering different types of Pneumatic Presses such as Hydro Pneumatic Press- H-Frame -2-Pillar, Hydro Pneumatic Press-H-Guides-4-Pillar, Hydro Pneumatic Press- C-Frame, Hydro Pneumatic Press-Compact-C-Frame and Hydro Pneumatic Press-Sleek C-Frame. These are fabricated using quality tested raw material and ensure long service life. Our range is composed of precision grounding base plate with diagonal T-slots that is suitable for high force application. These can be customized as per the specification detailed by clients.

We offer Hydro Pneumatic Press- H-Frame -2-Pillar, which have precision grounding base plate with diagonal T-slots. Developed in compliance with international quality standards, the heavy-duty H-frame of the press enables high force applications. Due to re-tooling time, the hydro pneumatic becomes flexible and delivers consistent performance in given environment. We also offer customization on our range as per the specifications of clients.

Features:

• Optimum performance
• Wider tool
• Sturdy construction
• Ideal for high force application
• Easy to maintenance
• Durable

We provide Hydro Pneumatic Press-H-Guides-4-Pillar that has a larger tool mounting area for optimum performance. The hydro pneumatic press comprises precision ground base plate with diagonal T-slots. Designed using IS standard raw material; our range meets the requirement of Construction, Mining, Pharmaceutical, Aviation, Steel rolling, Railways and Extrusion Industries.

Features:

• Sturdy construction
• Easy maintenance
• High flexibility due to short retooling time
• Precision functioning
• Suitable for high force application

Our Hydro Pneumatic Press- C-Frame is available with precision ground base plate and diagonal T-slots. This pneumatic press is fabricated using quality tested raw material and is widely used in Mining, Aviation, Railways, Construction and Mining Industries. Designed using heavy-duty frame, our range is suitable for high force application. This press has a larger tool mounting area and is suitable for clamping and straightening.

Features:

• Easy maintenance
• High flexibility due to short retooling time
• Optimum performance
• Sturdy construction
• Durable

We supply Hydro Pneumatic Press-Compact-C-Frame, which is developed in compliance with international quality standards. The application specific designed pneumatic press comes with welded C-frame that ensures minimal deflection. It also has precision ground base plate with diagonal T-slot. This pneumatic press is extensively used in Construction, Mining, Pharmaceutical, Aviation, Steel Rolling, Railways and Extrusion Industries.

Features:

• Precision functioning
• Compact to enable for tabletop
• Sturdy construction
• Easy maintenance
• Long functional life

We export Hydro Pneumatic Press-Sleek C-Frame that is based on advanced technology. The pneumatic press is provided with precision ground base plate with diagonal T-slot and welded C-frame that ensures minimal deflection. Fabricated using quality tested raw material, our range is widely appreciated for operational fluency. We cater our range to Construction, Mining, Pharmaceutical, Aviation, Steel Rolling, Railways and Extrusion Industries. This pneumatic press can be customized as per the requirement of clients.

Features:

• Optimum performance
• Durable
• Sturdy construction
• Easy maintenance
• Compact to enable for tabletop